Loading...
HomeMy WebLinkAbout4/23/15 equipmentspecs2015 "Hand Sinks" Pro-Bowl Sinks One Compartment Sinks w/ Stainless Steel Deep Drawn Bowls PBHS-W-1410-1 PBHS-F1410 PBHS-W-1410 FEATURES: * One piece deep drawn bowl OPTIONAL * All sink bowls have a large liberal radii with a ACCESSORIES minimum dimension of 2" and rectangular in design Qty for increased capacity. * Wall mounting bracket, Stainless Steel, off set design FAUCETS APRON SKIRT CONSTRUCTION: SIDE SPLASH BowlStainless Steel Sinks are TIG welded, Exposed welds ADA WRIST BLADES are polished to match adjacent surface. TOWEL DISPENSER SOAP DISPENSER MATERIAL: LEVER WASTES BowlType 304 stainless steel polish, satin finish OVER FLOWS BracketType 304 stainless steel polish, satin finish P- TRAPS John Boos & Co 315 South First Street - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 Email: sales@johnboos.com - Web-site: www. johnboos.com DETAILED SPECIFICATIONS PBHS-F-1410 17" 15" 17" 1/4 TURNDOWN 2" 8 1/2" IN BACK ANGLE SUPPORT 9" IN BACK 5 43" PBHS-W-1410-1 PBHS-W-1410 All dimensions are typical. Tolerance +/- .500". All units ship unassembled for reduced shipping cost. John Boos & Co 315 South First - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 Email: sales@johnboos.com - Web-site: www.johnboos.com May 2002 John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice Project :_______________________________________ Location :_____________________________________ Item #Quantity :___________________:_____________ Model # :______________________________________ UNDERCOUNTER: MR67EN IRT- MODEL: Pizza Prep Tables General Strengths Sanitation. The interior cabinet is built with Control systems. Higher precision in managing rounded corners (extensive radius for easy temperature settings. Greater ability to adjust cleaning). Quick ability to take off shelves and temperature ranges as per the end users slides for interior cleaning. Each cabinet has a requirement. drain at the bottom of the unit. When cleaning the 100% Tested. All condenser units are tested unit make sure the drain hose is routed to a floor 100%, in helium chambers to refrigerant leak drain. detections. Doors & Drawers. Self-closing door system Certified. INTERTEK Audited and Certified by with permanent pressure. Stay open feature for compliance with UL 471 and NSF 7. AENOR included when door remains open after 95 audited and certified by internationally recognized degrees. All doors and drawers include triple firm. ISO 9001:2008 (Quality); ISO 14001:2004 chamber door gaskets, easy to remove and snap (Environmental); OSHAS 18001:2007 (Prevention in. Doors are field reversible. and Worker Safety) Dimensions Crated N— N— Ref. Temp. Cond. Case Capacity (inches)Weight (mm) MODEL Doors Shelves/ Weight Range Unit. Amps Ref. (Cu. Ft.) (Lbs.) H /Pans Lids (Lbs.) (—F) H.P. 115 V. (L) (gr.)(—C) W D (Kg.) 67 32-5/8 40-3/80.70 35˜F/41˜F 17 463 2 / 9 4 / 2 R134a 3/8 7.1 IRT-MR67EN 170083010503202—C/5—C481210 ETL LISTED TO UL471 STANDARD AND SANITATION CLASSIFIED TO NSF7  WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE Infrico USA Corp.www.infrico.us APPROVALS: AVAILABLE AT: 7042 N.W. 46th Street service@infrico.com Miami, FL 33166 sales@infrico.com ___________ ______________ 1.305.777.9599 Office 1.305.777.9598 Fax Follow us: Project :_______________________________________ Location :_____________________________________ Item #Quantity :___________________:_____________ Model # :______________________________________ UNDERCOUNTER: MR67EN IRT- MODEL: Pizza Prep Tables STANDARD FEATURES Exterior Salad Top AISI 304 Stainless Steel Top, Stainless Steel insulated lid, AISI 430 Stainless Steel. Top includes 1/3 size polycarbonate food pans, (9) Interior pans, AISI 430 Stainless Steel, Pan divider bars included, Internal drain plug for easy cleaning, Removable sanitary polyethylene cutting board Sealed interior floors and rounded cabinet included. Shelving corners. Insulation (2) Plastic coated wire shelves per section, CFC-Free polyurethane insulation, entire cabinet Set of Stainless Steel shelf brackets, structure is foamed-in place using a high density Easy remove for cleaning, polyurethane insulation, Dimensions WxD: 20-7/8€x25-5/8€ (GN 2/1) (530x650 mm), Low GWP & Zero ODP effect. Compatible with 18€x26€(). sheet pans. 457x660 mm Doors Refrigeration Polyurethane insulated doors, Digital temperature controller with automatic defrost Self closing doors with stay open feature, system, Stainless Steel heavy-duty hinges, Evaporative pan, Triple chamber snap in door gaskets for easy Forced air refrigeration system, removal and cleaning, Extractable condensing unit for easy service, Field reversible doors, Evaporator coil coated with anti-corrosion material Door locks, 100% Polyester, Full-height door opening: 21-5/8€x20-5/8€ (550x523 Refrigeration capacity: 2126 Btu/h (14˜F) / 623 W (-10˜C). mm). Casters Electrical 4€ diameter casters, Cord and NEMA 5-15P plug. Locks provided on front set. Electrical connection is 115V / 1ph / 60 Hz. OPTIONAL FEATURES ETL Listed to UL471 Standard and Sanitation classified to NSF7. Set of 6 legs, height adjustable from 5€ to 8€, Electrical connection is: 220-230 V / 1ph / 50 Hz (plug PLAN VIEW type varies), RIGHT VIEWPLAN VIEW Stainless Steel wire shelves, ELEVATION Additional slide kits, Drawer kit, Flat lid, Single Overshelf, Double Overshelf. ETL LISTED TO UL471 STANDARD AND SANITATION CLASSIFIED TO NSF7  WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE Infrico USA Corp.www.infrico.us APPROVALS: AVAILABLE AT: 7042 N.W. 46th Street service@infrico.com Miami, FL 33166 sales@infrico.com ___________ ______________ 1.305.777.9599 Office 1.305.777.9598 Fax Follow us: PROJECT NAME: LOCATION: ITEM NO: HOT FOOD TABLE QTY: ELECTRIC EXPOSED ELEMENT WELL MODEL 3500 MODEL NO: Electric operated, stainless steel open shelving base hot food table with 20 gauge stainless steel top, and individual die-stamped 12” x 20” top openings. Individual thermostatically controlled, electrically heated, AIA NO: open food wells (spillage pans required for wet operation). Unit totally prewired to junction box, power cord is supplied. 7” wide plate shelf & 8” wide NSF workboard. Unit on 6” high adjustable legs. SIS NO: CSI SECTION: 11400 AVAILABLE MODELS:CONTROLS: 3500 Electric Exposed Element Wells, Unit comes standard with thermostatic controls. Each controls has a lighted Model 3513 with optional casters 3512 on/off switch that allows turning off of each control shown. 3513 independently. Controls and elements mounted on 3514 front of 7” deep removable stainless steel plate shelf. 3515 Connections to heating elements are located outside STANDARD FEATURES: of heated zone to avoid wiring deterioration. Individual food wells wired to common junction box(es). Power • Die stamped raised sanitary rim pan openings in cord is supplied. stainless steel top • Stainless steel body construction - no assembly required UNIT BASE: Bottom shelf to be stainless steel with • Thermostatic control for precise food temperatures - channel bracing. Body ends to be stainless steel. Legs one per well to be 6” high with adjustable bullet foot. Legs mounted • Stainless steel, full length plate shelf - 7” deep to full length channel frame assembly on bottom of • Stainless steel ends body assembly. • Full length, 8” wide NSF workboard • 6” high adjustable legs ORIGIN OF MANUFACTURE: Designed and • Power cord manufactured in the United States. • Available for 120V, 208V, or 240 volt operation UNIT TOP: Top to be one piece of die formed OPTIONS/ACCESSORIES: 20 gauge stainless steel with 1 5/8” square nosing. Top stamped with individual 12”x 20” die formed Counter Protectors raised perimeter openings. Unit fitted with compliment Serving Shelves/Plexi Shields of electrically heated, open food wells, individual Overshelves thermostatically controlled. Spillage pans required for wet Casters operation. Provided with 7” deep, removable 20 gauge Roll Covers stainless steel plate shelf, and 8” wide x 1/2” thick, full Adaptor Plates length NSF composition workboard. Spillage Pans Stainless Steel Back FOOD WELLS: 12”x 20” electrically heated, open Voltage Other than Standard food wells, individually and thermostatically controlled. On 3-5 Well Only (cord & plug not supplied as standard with 3 phase) Hot Food Table/Drop-Ins PPSPEC0017 RevE Revised 11/14 3500 31.5" 3" OF 29" 12" 2" WO 31.5" 1.5" 5" 36" J 9" 30" ModelLDHNo. of wellsNo. of elementsBottom Shelf Sq. Ft.120V-750Watt208V-865Watt240V-1150WattShip Wt. Material KWAmpsNEMAKWAmpsNEMAKWAmpsNEMA 351233”30”36”22S.S.5.51.5012.505-20P1.738.326-15P2.309.586-15P116 351348”30”36”33S.S.8.12.2518.755-30P2.6012.486-20P3.4514.386-20P174 351463”30”36”44S.S.10.73.0025.005-50P3.4616.636-30P4.6019.176-30P232 351578”30”36”55S.S.13.33.7531.255-50P4.3320.796-30P5.7523.966-30P290 . _______________________ ITEMNO 300-HW SERIES HOT FOOD DROP-IN WELL The gentle heating capability of HALO HEAT continuing the cooking process. 300-HWI/D6 Provides a more appealing product with better appearance and fresher taste. Front-of-the-house use with an existing counter, overhead lighting, and sneeze guard system or drop into a prep table for hot food plating convenience. Easy drop-in installation without the need of water or drainage connections and the related installation and water usage costs. Maintenance savings with the elimination of lime and scale 300-HW/D443 buildup associated with steam table holding. Increase employee safety with the elimination of burning steam when changing pans. Adjustable thermostats with remote control suitable for high steam table temperatures to scorch or burn. 300-HWLF Stainless steel interior walls are easy to clean with coved corners on two sides of the well. HWI series with individual wells and independent controls expands your menu options. IP X3 ANSI/NSF 4 The 300-HW is a heated hot food well with an exterior of 18 gauge stainless steel. The hot well includes stainless steel interior walls with coved corners on two sides. HWI and HWILF models are controlled by three (3) adjustable thermostats with a range of 1 through 10 and an indicator light. HW and HWLF models are controlled by a single adjustable thermostat with a range of 1 through 10 and an indicator light. The thermostat control is attached The heated well base is available in two depths. The 4-3/8" (111mm) deep unit holds 4" (102mm) deep pans and the 6-3/8" (162mm) deep unit holds 6" (153mm) deep pans. Both units will hold a combination of standard (gastronorm) pan sizes. The D4 and D6 hot well includes six (6) pan divider bars. The D443 and D643 hot well includes nine (9) pan divider bars. 4-3/8" (111mm) depth, accepts three (3) full-size (gastronorm) pans 6-3/8" (162 mm) depth, accepts three (3) full-size (gastronorm) pans 4-3/8" (111mm) depth, accepts three (3) full-size (gastronorm) pans 6-3/8" (162 mm) depth, accepts three (3) full-size (gastronorm) pans 4-3/8" (111mm) depth, accepts three (3) full-size and three (3) third-size (gastronorm) pans 6-3/8" (162 mm) depth, accepts three (3) full-size and three (3) third-size (gastronorm) pans 4-3/8" (111mm) depth, accepts three (3) full-size (gastronorm) pans 6-3/8" (162 mm) depth, accepts three (3) full-size (gastronorm) pans 4-3/8" (111mm) depth, accepts three (3) full-size (gastronorm) pans 6-3/8" (162 mm) depth, accepts three (3) full-size (gastronorm) pans 4-3/8" (111mm) depth, accepts three (3) full-size (gastronorm) pans and three (3) third-size (gastronorm) pans 6-3/8" (162 mm) depth, accepts three (3) full-size (gastronorm) pans and three (3) third-size (gastronorm) pans Voltage Choices: Cord Location: 120V Back, Standard 208-240V Bottom, Option 230V .../... PHONEUSACANADAFAXUSAONLY ... , . PRINTEDINUSADUETOONGOINGPRODUCTIMPROVEMENTSPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE #08C - 02/15 INSTALLATION REQUIREMENTS Unit must be installed level and must not be installed in any area where it may be directly affected by steam, grease, dripping water, high temperatures, or any other severely adverse conditions. Hot well outer walls can reach 200° to 260°F (93° to 127°C). Verify countertop material temperature rating with manufacturer before 300-HW PRODUCT\\PAN CAPACITY 4" BASEDONDEEPPANS installing hot well to ensure countertop can withstand heat. 72 lb (33 kg) / 96 lbs (43.5 kg) . MAX CLEARANCE REQUIREMENTS . : 43.5 qt. (42 L) / 56.6 qt. (53.3 L) MAXVOLUME 1" (25mm) from combustible surfaces FULL-SIZE PANS*: Three (3) 12" x 20" x 4" GN 1/1 (325mm x 530mm x 102mm) OPTIONS & ACCESSORIES HALF-SIZE PANS*: Six (6) 12" x 10" x 4" Pan Divider Bar — -/- . . . . . . . . . . . . . . . . . . . . . .11318 HALFSIZETHIRDSIZE GN 1/2 (325mm x 265mm x 102mm) Pan Divider Bar — - . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16019 FULLSIZE THIRD-SIZE PANS*: Nine (9) 12" x 6" x 4" Pan Divider Bar — . . . . . . . . . . . . . . . . . . . . . . . . . .1012405 GN 1/3 (325mm x 176mm x 102mm) D443/D643 SIZE * 2-1/2" (102 mm) ; D6 6" (153 mm) WILLALSOACCEPTDEEPPANSUNITSWILLACCEPTDEEPPANS 300-HW SERIES 40-15/16" (1039mm) HOT FOOD DROP-IN WELL 1-9/16" (39mm)37-7/8" (962mm) WELL (38mm) 40-15/16" (1039mm) 1-9/16" (39mm)37-7/8" (962mm) " 1-1/2 (37mm) 11/16" (16mm)11/16" (16mm) (765mm) (691mm) FLANGEFLANGE 39-5/8" (1007mm) (512mm) " (586mm) 1-1/2 WELL " " 30-3/16 27-1/4 WELL " " 20-3/16 23-1/8 (62mm) (125mm) Ø 1/4" (5mm) " " 2-1/2 4-15/16 6-7/16" 1/4" (6mm) (163mm) 300-HW/D6 & /D4 6-15/16" (175mm) 300-HW/D643 & /D443 STANDARD WELL (46mm) (46mm) (46mm) (46mm) STANDARD WELL 300-HW/D6 (104mm) (104mm) STANDARD FLANGE (104mm) (104mm) 4-13/16" 7-5/16" (185mm)9-3/16" (233mm) "" 7-5/16" (185mm)9-1/4" (234mm) "" 1-7/81-7/8 (122mm) 1-7/81-7/8 5-9/16" (140mm)7-7/16" (189mm) 5-9/16" (140mm)7-1/2" (190mm) " " "" 4-1/8 4-1/8 4-1/84-1/8 4-3/8" (111mm) 6-3/8" (162mm) 4-3/8" (111mm)6-3/8" (162mm) 4-13/16" WELL5" (127mm) WELL WELLWELL 10-13/16" (274mm) (122mm) 6-15/16" (175mm) 4-13/16" 6" (122mm)(152mm) (559mm) (512mm) (559mm) (512mm) 5" (127mm) (738mm) (738mm) WELLWELL (691mm) (691mm) 6-15/16" (175mm) """" 22-1/1620-3/1622-1/1620-3/16 WELLWELL "" "" 29-1/1629-1/16 27-1/427-1/4 CONDUIT WHEN EXITING BACK 6" (152mm) 9/16" (14mm) 9/16" (14mm) FLANGE FLANGE CONDUIT WHEN 9/16" (14mm)9/16" (14mm) FLANGEFLANGE EXITING BOTTOM 4-13/16"4-13/16" 4-13/16"4-13/16" (122mm)(122mm) (122mm)(122mm) 4" (102mm)4" (102mm) 4" (102mm)4" (102mm) 4-15/16" (125mm)4-15/16" (125mm) 4-15/16" (125mm)4-15/16" (125mm) 300-HW/D443300-HW/D643 300-HW/D4300-HW/D6 4" (102mm) DEEP WELL6" (153mm) DEEP WELL 4" (102mm) DEEP WELL6" (153mm) DEEP WELL 300-HWLF SERIES 44-1/4" (1123mm) 37-7/8" (962mm) 3-3/16" (81mm) HOT FOOD DROP-IN WELL WELL (46mm) (46mm) 7-5/16" (185mm)9-1/8" (232mm) 2-5/16" (59mm)2-5/16" (59mm) (104mm) (104mm) FLANGEFLANGE 39-11/16" (1007mm)5-9/16" (140mm)7-7/16" (189mm) "" 1-7/81-7/8 (512mm) (686mm) 4-3/8" (111mm)6-3/8" (111mm) WELLWELL " " 4-1/8 4-1/8 WELL " " 20-3/16 27-1/16 (559mm) (512mm) (559mm) (512mm) (62mm) (125mm) WELLWELL Ø 1/4" (5mm) "" "" 22-1/1620-3/1622-1/1620-3/16 " " 2-1/2 1/4"(6mm)4-15/16 (63mm) (63mm) (87mm) 6-7/16" (163mm)FLANGEFLANGE "" 6-15/16" (175mm) " 2-1/22-1/2 3-7/16 10-13/16" (274mm) 4-13/16" 6" (122mm)(152mm) 6" (152mm) 4-13/16" (122mm) 5" (127mm) 6-15/16" (175mm) CONDUIT WHEN CONDUIT WHEN 4-13/16"4-13/16" EXITING BACKEXITING BOTTOM (122mm)(122mm) 4" (102mm)4" (102mm) 4-15/16" (125mm) 4-15/16" (125mm) 300-HWLF/D4300-HWLF/D6 4" (102mm) DEEP WELL6" (153mm) DEEP WELL ... #08C - 02/15 , . PRINTEDINUSA DUETOONGOINGPRODUCTIMPROVEMENTSPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE 300-HWI SERIES 40-7/8" (1038mm) 12" (304mm) 1-7/16" (36mm) HOT FOOD DROP-IN WELL WELL (46mm) (46mm) (46mm) (46mm) (38mm) 9-1/4" (234mm) 7-5/16" (185mm) 7-5/16" (185mm)9-1/4" (234mm) "" "" (512mm) (588mm) " 1-7/8 1-7/8 1-7/81-7/8 1-1/2 7-1/2" (189mm) 5-9/16" (141mm) 7-1/2" (189mm)5-9/16" (141mm) 6-3/8" (162mm) WELL 4-3/8" (111mm)6-3/8" (162mm)4-3/8" (111mm) WELL WELLWELLWELL "" 23-3/1620-3/16 (104mm) (104mm) (104mm) (104mm) (559mm) (512mm) (559mm) (512mm) WELLWELL (738mm) (738mm) (691mm) (691mm) " " " " "" "" 4-1/8 4-1/84-1/8 4-1/8 22-1/1622-1/16 20-3/1620-3/16 WELLWELL (15mm) (15mm) " " "" 29-1/16 29-1/16 27-1/4 FLANGEFLANGE 27-1/4 300-HWI/D6 & /D4 STANDARD WELL "" 5/85/8 (122mm) (122mm) (15mm) (15mm) 4-13/16" FLANGEFLANGE (122mm) " " 4-13/16 4-13/16 " " 5/85/8 12" (305mm) 13-15/16" (353mm) 4-13/16"4-13/16" 40-7/8" (1038mm) (122mm)(122mm) 12" (304mm) 1-7/16" (36mm) WELL 4" (102mm) 4" (102mm)4" (102mm)4" (102mm) (38mm) 4-15/16" (125mm) 4-15/16" (125mm)4-15/16" (125mm)4-15/16" (125mm) " 300-HWI/D4300-HWI/D6 1-1/2 300-HWI/D443300-HWI/D643 4" (102mm) DEEP WELL6" (153mm) DEEP WELL 4" (102mm) DEEP , 4/3 LENGTH WELL6" (153mm) DEEP, 4/3 LENGTH WELL (767mm) (691mm) WELL 5/8" (16mm) "" 27-1/4 30-1/4 FLANGE 39-11/16" (1007mm) 10-13/16" (274mm) 4-13/16" 6" (122mm)(152mm) 6" (152mm) (125mm) (62mm) Ø 1/4" (5mm) CONDUIT WHEN CONDUIT WHEN " " 2-1/2 1/4" (6mm)13-7/16" (340mm) 4-15/16 EXITING BACKEXITING BOTTOM 300-HWI/D643 & /D443 13-15/16" (353mm) STANDARD WELL 12" (305mm)300-HWI/D6 STANDARD FLANGE 13-15/16" (353mm) 3-7/16" (87mm) 300-HWILF 44-1/4" (1124mm) SERIES 12" (304mm) 3-1/8" (79mm) WELL HOT FOOD DROP-IN WELL 20-3/16" (512mm) 27-1/16" (686mm) 1-7/8" (46mm)1-7/8" (46mm) WELL 7-5/16" (185mm)9-1/4" (234mm) 7-1/2" (189mm) 5-9/16" (141mm) 10-13/16" (274mm) 2-1/2" (63mm) 2-1/2" (63mm) 4-13/16" 6" FLANGE FLANGE (122mm)(152mm) 4-1/8" (104mm) 4-1/8" (104mm) 22-1/16" (559mm)22-1/16" (559mm) 20-3/16" (512mm)20-3/16" (512mm) WELLWELL CONDUIT WHEN EXITING BACK 4-13/16" (122mm) 6" (152mm) 12" (305mm) 13-15/16" (353mm) 2-5/16" (59mm) FLANGE 4-3/8" 6-3/8" 39-11/16" (1007mm) (111mm) (162mm) WELL WELL CONDUIT WHEN 4-13/16" 4-13/16" (122mm)EXITING BOTTOM (122mm) 4" (102mm) 4" (102mm) 4-15/16" (125mm) 4-15/16" (125mm) 2-1/2" (62mm) 4-15/16" (125mm) Ø 1/4" (5mm) 300-HWILF/D6 300-HWILF/D4 LARGE FLANGE 1/4" (6mm)13-7/16" (340mm) LARGE FLANGE 13-15/16" (353mm) 300-HWILF/D6 LARGE FLANGE #08C - 02/15 ... , . PRINTEDINUSADUETOONGOINGPRODUCTIMPROVEMENTSPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE ELECTRICAL: /k VOLTAGEPHASECYCLEHZAMPSWPLUGCONFIGURATION 5-20P NEMA 120150/6015.01.8 20A - 125V 300-HW/D4 & /D6,PLUG 300-HWLF/D4 & /D6, 6-15P NEMA 208 – 240150/606.5 – 7.51.4 – 1.8 300-HWI/D4 & /D6,15A - 250V PLUG 300-HWILF/D4 & /D6 7/72-16P1363 CEECHBS 230150/607.81.8 250V 250V 250V PLUGRATEDPLUGRATEDPLUGRATED L5-30P NEMA 120150/6020.32.4 30A - 125V PLUG 300-HW/D443 & /D643, 6-15P NEMA 208 – 240150/608.8 – 10.11.8 – 2.4 300-HWI/D443 & /D64315A - 250V PLUG 7/72-16P1363 CEECHBS 230150/6010.62.4 250V 250V 250V PLUGRATEDPLUGRATEDPLUGRATED DIMENSIONS: OVERALL EXTERIORWELL INTERIORCOUNTER CUTOUTCONTROL BOX CUTOUT HEIGHTWIDTHDEPTHHEIGHTWIDTHDEPTHWIDTHDEPTHHEIGHTWIDTHDEPTH 7-5/16"40-15/16"23-1/8"4-3/8"37-7/8"20-3/16"40"22-1/2"4-1/4"5-1/4"10-13/16" 300-HW/D4 (185mm)(1039mm)(586mm)(111mm)(962mm)(512mm)(1016mm)(572mm)(108mm)(133mm)(274mm) 9-1/4"40-15/16"23-1/8"6-3/8"37-7/8"20-3/16"40"22-1/2"4-1/4"5-1/4"10-13/16" 300-HW/D6 (234mm)(1039mm)(586mm)(162mm)(962mm)(512mm)(1016mm)(572mm)(108mm)(133mm)(274mm) 7-5/16"40-15/16"30-3/16"4-3/8"37-7/8"27-1/4"40"29-1/2"4-1/4"5-1/4"10-13/16" 300-HW/D443 (185mm)(1039mm)(765mm)(111mm)(962mm)(691mm)(1016mm)(749mm)(108mm)(133mm)(274mm) 9-3/16"40-15/16"30-3/16"6-3/8"37-7/8"27-1/4"40"29-1/2"4-1/4"5-1/4"10-13/16" 300-HW/D643 (233mm)(1039mm)(765mm)(162mm)(962mm)(691mm)(1016mm)(749mm)(108mm)(133mm)(274mm) 7-5/16"44-1/4"27-1/16"4-3/8"37-7/8"20-3/16"40"22-1/2"4-1/4"5-1/4"10-13/16" 300-HWLF/D4 (185mm)(1123mm)(686mm)(111mm)(962mm)(512mm)(1016mm)(572mm)(108mm)(133mm)(274mm) 9-1/8"44-1/4"27-1/16"6-3/8"37-7/8"20-3/16"40"22-1/2"4-1/4"5-1/4"10-13/16" 300-HWLF/D6 (232mm)(1123mm)(686mm)(162mm)(962mm)(512mm)(1016mm)(572mm)(108mm)(133mm)(274mm) 7-5/16"40-7/8"23-3/16"4-3/8"12"20-3/16"40"22-1/2"4-1/4"12-1/4"10-13/16" 300-HWI/D4 (185mm)(1038mm)(588mm)(111mm)(304mm)(512mm)(1016mm)(572mm)(108mm)(311mm)(274mm) 9-1/4"40-7/8"23-3/16"6-3/8"12"20-3/16"40"22-1/2"4-1/4"12-1/4"10-13/16" 300-HWI/D6 (234mm)(1038mm)(588mm)(162mm)(304mm)(512mm)(1016mm)(572mm)(108mm)(311mm)(274mm) 7-5/16"40-7/8"30-1/4"4-3/8"12"27-1/4"40"29-1/2"4-1/4"12-1/4"10-13/16" 300-HWI/D443 (185mm)(1038mm)(767mm)(111mm)(304mm)(691mm)(1016mm)(749mm)(108mm)(311mm)(274mm) 9-1/4"40-7/8"30-1/4"6-3/8"12"27-1/4"40"29-1/2"4-1/4"12-1/4"10-13/16" 300-HWI/D643 (234mm)(1038mm)(767mm)(162mm)(304mm)(691mm)(1016mm)(749mm)(108mm)(311mm)(274mm) 7-5/16"44-1/4"27-1/16"4-3/8"12"20-3/16"40"22-1/2"4-1/4"12-1/4"10-13/16" 300-HWILF/D4 (185mm)(1124mm)(686mm)(111mm)(304mm)(512mm)(1016mm)(572mm)(108mm)(311mm)(274mm) 9-1/4"44-1/4"27-1/16"6-3/8"12"20-3/16"40"22-1/2"4-1/4"12-1/4"10-13/16" 300-HWILF/D6 (234mm)(1124mm)(686mm)(162mm)(304mm)(512mm)(1016mm)(572mm)(108mm)(311mm)(274mm) *Allow 6" (152mm) clearance from control box to conduit bend . WEIGHT: EST * * NETWEIGHTSHIPWEIGHTCRATEDIMENSIONSLXWXH 300-HW/D454.5 lb (25 kg)124 lb (56 kg)49" x 34" x 15" (1245 x 864 x 381mm) 300-HW/D661 lb (28 kg)124 lb (56 kg)49" x 34" x 15" (1245 x 864 x 381mm) 300-HW/D44368 lb (31 kg) CONTACTFACTORYCONTACTFACTORY 300-HW/D64375 lb (34 kg) CONTACTFACTORYCONTACTFACTORY 300-HWLF/D458 lb (26 kg) 49" x 34" x 15" (1245 x 864 x 381mm) CONTACTFACTORY 300-HWLF/D664.5 lb (29 kg) 49" x 34" x 15" (1245 x 864 x 381mm) CONTACTFACTORY 300-HWI/D469 lb (31 kg) 49" x 34" x 15" (1245 x 864 x 381mm) CONTACTFACTORY 300-HWI/D677.5 lb (35 kg) 49" x 34" x 15" (1245 x 864 x 381mm) CONTACTFACTORY 300-HWI/D44385 lb (39 kg) CONTACTFACTORYCONTACTFACTORY 300-HWI/D64399 lb (45 kg) CONTACTFACTORYCONTACTFACTORY 300-HWILF/D474 lb (34 kg) 49" x 34" x 15" (1245 x 864 x 381mm) CONTACTFACTORY 300-HWILF/D683 lb (38 kg) 49" x 34" x 15" (1245 x 864 x 381mm) CONTACTFACTORY * . . DOMESTICGROUNDSHIPPINGINFORMATIONCONTACTFACTORYFOREXPORTWEIGHTANDDIMENSIONS ... #08C - 02/15 , . PRINTEDINUSA DUETOONGOINGPRODUCTIMPROVEMENTSPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE . _______________________ ITEMNO 1000-UP SERIES LOW TEMPERATURE HOT HOLDING CABINETS HALO HEAT…a controlled, uniform heat source that gently surrounds food for better appearance, taste, and longer holding life. Holds hot food hot...meat, poultry, fish, potatoes, casseroles, vegetables, rolls, etc. Dual purpose — both a holding cabinet and dough proofer. Close temperature tolerance and even heat application maintain ideal serving temperatures throughout the cabinet. Two individually controlled, insulated warming compartments give the benefit of holding at two different temperatures. Stainless steel interior resists corrosion. Available in reach-in or pass-through design. Casters provide easy mobility. Antimicrobial handle retards the growth of illness-causing pathogens. Digital control senses temperature drops faster, providing quick heat recovery time. Door venting holds crispy food better. Two (2) individually controlled oven compartments are enclosed in one 20 gauge stainless steel exterior and doors. Each compartment has one (1) Simple Control with ON/OFF power switch; Up and Down Arrow Keys with a temperature range of 60° to 200°F (16° to 93°C); heat indicator light; temperature display key, and digital display. Included are four (4) chrome plated side racks spaced at 2-15/16" (75mm) centers, and one (1) set of 5" (127mm) heavy duty casters – 2 rigid and 2 swivel with brake. Double cavity holding cabinet MODEL 1000-UP Double cavity proofing cabinet with window doors / MODEL 1000-UPP Solid state electronic control option simplifies temperature setting and has a clear, easy-to-read LED display and includes our patented SureTemp™ heat recovery system. SureTemp™ reacts immediately to compensate for any loss of heat whenever the door is opened. Deluxe control is also available with six independent multiple timers for each compartment to facilitate “first-in, first-out” concept. Deluxe control with internal temperature probe. ANSI/NSF 4 120V Solid Door, standard 208-240V Window Door, optional 230V Note: Window standard on proofing cabinet Reach-In, standard Pass-Through, optional Right-hand swing, standard Left-hand swing, optional Note: Pass-through cabinets cannot have all doors hinged on the same side. IP X4 .../... PHONEUSACANADAFAXUSAONLY ... , . PRINTEDINUSADUETOONGOINGPRODUCTIMPROVEMENTSPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE #38 - 09/14 1000-UP SERIES LOW TEMPERATURE HOT HOLDING CABINETS Cord Length: 120V - 9' (2743mm) 208-240V - 8' (2438mm) 25-1/16" (636mm) 230V - 8' (2438mm) H x W x D DIMENSIONS: (1844mm) (876mm) : EXTERIOR Pass-Through 75-13/16" x 23-15/16" x 32-11/16" (1924mm x 608mm x 804mm) (1360mm) (1309mm) Option Electrical Connection - (): " PASSTHROUGHEXTERIOROPTION Electrical " 2 34-1/ 8 72-5/Connection Shown with 75-13/16" x 23-15/16" x 34-3/16" (1924mm x 608mm x 867mm) Optional " " Bumper 6 51-9/16 : 53-9/1 INTERIOREACHCOMPARTMENT 26-7/8" x 18-7/8" x 26-1/2" (682mm x 479mm x 673mm) ELECTRICAL / & kW VOLTAGEPHASECYCLEHZAMPSCORDPLUG 120 1 60 16.0 1.9 5-20, NEMAP 20A-125 34-3/16" (867mm) 23-3/8" (593mm) VPLUG 17-1/16" 22-9/16" (572mm) 208 1 60 7.0 1.4 6-15, (433mm) NEMAP 240 1 60 8.0 1.9 15A-250 VPLUG (... ) USAONLY Electrical 230 1 50/60 7.7 1.8 7/7 CEE Connection (127mm) casters* (1924mm) 250V PLUGRATED Pass-Through (1840mm) Option 2-16 CHP 250V PLUGRATED " 75-13/16 " 1363 (.. ) BSUKONLY 2 72-1/ " 250V PLUGRATED 5 with (173mm) ( ) PRODUCT\\PAN CAPACITY PERCOMPARTMENT " 6-13/16 120 lbs (54kg) MAXIMUM : 60 (76 ) VOLUMEMAXIMUMQTSLITERS - : 1/1: FULLSIZEPANSGASTRONORM 20-1/2" Four (4) 20" x 12" x 2-1/2" 530mm x 325mm x 65mm (521mm) 24-1/8" (613mm) 23-15/16" ONOPTIONALWIRESHELVESONLY 32-11/16" (804mm) (608mm) - : FULLSIZESHEETPANS *74-1/16" (1881mm) - with optional 3-1/2" (89mm) casters Eight (8) 18" x 26" x 1" *75-5/8" (1921mm) - with optional 6" (152mm) legs CLEARANCE REQUIREMENTSINSTALLATION REQUIREMENTS 3" (76mm) — Oven must be installed level. BACK — The oven must not be installed in any area where it 2" (51mm) TOP may be affected by steam, grease, dripping water, 1" (25mm) EACHSIDE extreme temperatures, or any other severely adverse WEIGHT conditions. : 282 lb (128g) : (.) 360 lb (163 kg) NETSHIP EST — Appliances with casters and no cord or plug must be secured to the building structure with a flexible : ( ) CARTONDIMENSIONS LXWXH connector. . NOTFACTORYSUPPLIED 35" 35" 82" (889mm x 889mm x 2083mm) XX OPTIONS & ACCESSORIES Pan Grid, Wire, Chrome Plated PN-2115 Bumper, Full Perimeter 5009767 18" x 26" (457mm x 660mm x 25mm) PANINSERT Casters, Stem - 2 , 2 / RIGIDSWIVELWBRAKE Security Panel with Lock 5013934 3-1/2" (89mm) 5008017 Shelf, Stainless Steel, - SH-2325 REACHIN Door Lock with Key ( ) LK-22567 EACHHANDLE Shelf, Stainless Steel, - SH-2346 PASSTHROUGH Drip Pan with Drain, 1-11/16" (43mm) deep 5005616 Water Reservoir Pan* 1775 Drip Pan without Drain, 1-7/8" (48mm) deep 11906 Water Reservoir Pan Cover* 1774 Legs, 6" (152mm), Flanged - 5011149 *included with proofing cabinet SETOFFOUR .../... PHONEUSACANADAFAXUSAONLY #38 - 09/14 ... , . PRINTEDINUSA DUETOONGOINGPRODUCTIMPROVEMENTSPECIFICATIONSARESUBJECTTOCHANGEWITHOUTNOTICE "ST6-SSK" Stainless Steel Top Work Tables w/ 16 Gauge Stainless Steel Work Top w/ Stainless Steel Base & Adjustable Undershelf Item # Qty Model # Project 16 GAUGE TOP w/ ADJUSTABLE UNDERSHELF 24"WIDEQty30"WIDEQty36"WIDEQty ST6-2430SSKST6-3030SSK ST6-2436SSKST6-3036SSKST6-3636SSK ST6-2448SSKST6-3048SSKST6-3648SSK ST6-2460SSKST6-3060SSKST6-3660SSK ST6-2472SSKST6-3072SSKST6-3672SSK ST6-2484SSKST6-3084SSKST6-3684SSK ST6-2496SSKST6-3096SSKST6-3696SSK ST6-24108SSKST6-30108SSKST6-36108SSK FEATURES: ST6-24120SSKST6-30120SSKST6-36120SSK * 16 Gauge Stainless Steel Top Type 300 stainless steel with # 4 polish, satin finish * Top is Sound Deadened * Reinforced with 1"x2" channel running entire length of table * 1 1/2" Stallion Edge on front and rear with side edges 90 degree bend down for table line-up * Stainless Steel Base with Adjustable Undershelf * Adjustable bullet feet * Shipped knocked-down, easy - to - assemble * NSF Approved CONSTRUCTION: Top:Stainless Steel Tops are TIG welded, Exposed welds are polished to match adjacent surface. OPTIONAL MATERIALCCESSORIE :AS Top:16 gauge stainless steelMODELQt #y Type 300 stainless steel with # 4 polish, satin finish DRAWER Shelf:18 gauge stainless steel DRAWER LOCK ** 36" Wide Tables, 16 Gauge Lower Shelf CASTERS Legs:1 5/8" Round O.D., 16 gauge tubular stainless steel OVERSHELVES Gussets:Stainless Steel SINKS Feet:1" adjustable stainless steel bullet feet POT RACK John Boos & Co 3601 S. Banker Street - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 FF-1 Email: sales@johnboos.com - Web-site: www. johnboos.com DETAILED SPECIFICATIONS L W 1 1/2"L LW CLEARANCE = CLEARANCE = ¿ L-8"2 L - 9.625" 35 3/4" Adj All units ship unassembled for reduced shipping cost.Finished size of undershelf. Units 7 ft. and larger are furnished with six legs.Shelf length = length minus 4.875" All dimensions are typical.Shelf width = width minus 4.25" Tolerance +/- .500". 16 GAUGE TOP & UNDERSHELF L24" WIDEWT.30" WIDEWT.36" WIDEWT. 30ST6-2430SSK44ST6-3030SSK56- 36ST6-2436SSK52ST6-3036SSK59ST6-3636SSK75 48ST6-2448SSK64ST6-3048SSK76ST6-3648SSK82 60ST6-2460SSK76ST6-3060SSK92ST6-3660SSK98 72ST6-2472SSK97ST6-3072SSK111ST6-3672SSK144 84ST6-2484SSK108ST6-3084SSK125ST6-3684SSK135 96ST6-2496SSK118ST6-3096SSK139ST6-3696SSK155 108ST6-24108SSK130ST6-30108SSK153ST6-36108SSK171 120ST6-24120SSK142ST6-30120SSK167ST6-36120SSK187 120 = Length of Work Surface 30 = Width of Work Surface 6 = 16 ga. Work SurfaceSS = Stainless Legs & Shelf ST = Stainless Steel TopK = K.D. w/ Adjustable Shelf ST6-30120SSK John Boos & Co 3601 S. Banker Str - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 Email: sales@johnboos.com - Web-site: www.johnboos.com July 2013 John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice FF-2 Ò Item# _______________________________________________ Job _________________________________________________ METRO MOBILE END- AND SIDE-LOAD WIRE BUN PAN RACKS ¤ Cost Effective: MetroÔs Bun Pan Racks offer an economical solution for sturdy, dependable storage and transport of bun pans. ¤Two Styles Available: End-load models allow for optimum floor space utilization, while side-load models offer a larger tray landing area. Both styles can be loaded on one side and unloaded from the other for maximum efficiency and convenience. ¤Choice of Slide Spacing: Each style is available with a choice of slide spacings Ð 1/" (38mm), which has a 38 pan 1 2 capacity, and 3" (76mm), which has a 20 pan capacity. ¤UPS Shippable in one box for lower freight costs. ¤Quick, Secure Assembly: Units assemble quick and easy without special tools. ¤Lightweight, Maneuverable: 5" (127mm) swivel casters promote ease of mobility. ¤Super Erecta BriteFinish © 13.42 InterMetro Industries Corporation Ò North Washington Street Wilkes-Barre, PA 18705 Copyright ¨1999 InterMetro Industries Corporation www.metro.com Job ____________________________________________ Ò 13.42 METRO MOBILE END- AND SIDE-LOAD WIRE BUN PAN RACKS SPECIFICATIONS: ¤Slides, Frame, Posts: Super Erecta Britefinish with © Metrolac protective coating. ¤Casters: 5" (127mm) stem/swivel casters with resilient tread. DIMENSIONS: Approx. HeightWidthLengthSlide SpacingPan CapacityPkd. Wt. Model No.Description(in.)(mm)(in.)(mm)(in.)(mm)(in.)(mm)No.Size (in.)(lbs.)(kg) RE1End-Load69175021/550276851/403818x266128 31 42 RE3End-Load69175021/550276853752018x267032 3 4 RS1Side-Load69175019/490307601/403818x266128 11 22 RS3Side-Load69175019/490307603752018x267032 1 2 ACCESSORIES: Model No. 9992DB3/" (90mm) Diameter Rubber Donut Bumper 1 2 9992N5/" (140mm) Diameter Rubber Donut Bumper 1 2 Manufactured by: InterMetro Industries Corp. Phone 570-825-2741 North Washington StreetFAX 570-825-2852 Wilkes-Barre, PA 18705For Product Information, call 1-800-433-2232 www.metro.comFor Customer Service, call 1-800-992-1776 L02-074 InterMetro Industries Corporation Ò 5/99 BJ North Washington Street Printed in U.S.A. Wilkes-Barre, PA 18705 Information and specifications are subject to change without notice. Please confirm at time of order. www.metro.com Project Item # Quantity CC12/CC22 GLOBE FOOD EQUIPMENT COMPANY Meat Choppers CC22 Models CC12 #12 Meat Chopper CC22 #22 Meat Chopper CC12 Meat Choppers CC12/CC22 Optional Accessories Standard Features • Powerful 1 HP (CC12) or 1 1/2 HP (CC22) high torque motor • Direct gear-driven transmission Standard Warranty • Stainless steel housing, cylinder, worm gear, • One-year parts and labor adjusting ring and product tray • Permanent grease lubricated gear box • Manual reset motor overload protection • Forward/reverse switch • Compact size and seamless construction • Capacity 250 lbs/hr (CC12) or 450 lbs/hr (CC22) • Top-mounted handle • Rubber feet • Seven-foot cord and plug Standard Accessories • Knife • Stainless steel product tray • 1/4” (6mm) plate • 5/16” (8mm) plate • Plastic food pusher Approved By: Date: 2153 Dryden Rd. GLOBE FOOD EQUIPMENT COMPANY Dayton, OH 45439 Phone: 937-299-5493 www.globeslicers.com Phone: 800-347-5423 Fax: 937-299-4147 Meat Choppers CC12/CC22 Motor: 1 HP 8 amps (CC12) or Worm Speed: 170 RPM’s Optional Accessories (CC22): 1 1/2 HP 16 amps (CC22), 115/60/1. Manual reset motor overload Standard Equipment: Knife, 1/4” • Plate sizes available for model protection.and 5/16” plates, stainless steel CC22: product tray and plastic food pusher. CP02-22 1/16” (2mm) Transmission: Precision made CP04-22 5/32” (4mm) gears and shafts, mounted on ball Optional Accessories (CC12): CP06-22 1/4” (6mm) bearings. Permanent grease packed CP08-22 5/16” (8mm) sealed gear box.• Plate sizes available for model CP10-22 3/8” (10mm) CC12: CP12-22 1/2” (12mm) Switch: Conveniently mounted on CP02-12 1/16” (2mm) CP14-22 9/16” (14mm) side of machine, with Off, Forward CP04-12 5/32” (4mm) CP16-22 5/8” (16mm) and Reverse positions. CP06-12 1/4” (6mm) CP18-22 11/16” (18mm) CP08-12 5/16” (8mm) CP20-22 3/4” (20mm) Construction: The seamless CP10-12 3/8” (10mm) *CP00-22 housing, cylinder, worm gear, CP12-12 1/2” (12mm)* Important: This plate must be adjusting ring and product tray are CP14-12 9/16” (14mm) made of stainless steel for quick and CP16-12 5/8” (16mm) casings. easy cleaning. Rubber feet prevent CP18-12 11/16” (18mm) the machine from moving during *CP00-12Dimensions: (CC22) operation.* Important: This plate must be used Net weight: 88 lbs. (39.9 kgs.) Shipping weight: 95 lbs. (43 kgs.) Capacity: Box Dimensions: CC12: 250 lbs. of meat per hour Dimensions: (CC12)15”W x 23”D x 23”H CC22: 450 lbs. of meat per hour Net weight: 66 lbs. (29.9 kgs.)(38.1cm x 58.4cm x 58.4cm) Shipping weight: 77 lbs. (34.8 kgs.)Overall Length: 18.25” (46.4cm) Cord and Plug: Attached is a Box Dimensions:Overall Width: 9.66” (24.6cm) 12”W x 18”D x 16”HOverall Height: 20.75” (52.7cm) (30.5cm x 45.7cm x 40.6cm) Overall Length: 16.5” (41.9cm) Overall Width: 9.25” (23.5cm) Overall Height : 16.66” (42.3cm) Printed in U.S.A. 3-2009 2153 Dryden Rd. GLOBE FOOD EQUIPMENT COMPANY Dayton, OH 45439 Phone: 937-299-5493 www.globeslicers.com Phone: 800-347-5423 Fax: 937-299-4147 C O ONVECTIONVEN S L-S ERIES G,S D ASINGLEECK Standard Features SLGS/12SC, SLGS/12CCH Job Item# SLGB/12SC, SLGB/12CCH OPTIONAL NRG System required for rebates. NRG System units are Energy Star Approved. (Standard Depth Only) Available Controls SC-Standard Controls CCH-Cycle / Cook & Hold Control (SLGS/12SC shown with optional casters) STANDARD CONSTRUCTION SPECIFICATIONS Oven Heating: Exterior Finish: Doors: Electronic Ignition: Oven Interior: Control Panel: Rack and Rack Guides: Interior Lights: Blower Fan and Motor: Legs: www.yatesgd.com www.yatesgraphicdesign.com Models: SLGS/12SCSLGS/12CCH SLGB/12SC SLGB/12CCH 3” (76) Full 180° Opening 18.63” 9” (473) 2.5” (64) 34.4” (873) Shown with optional casters. 31.25” 13.5” 28.5” (873) Legs only (343) (724) reduces height by 3” DO IR CS C EPTHVENNTERIORACKLEARANCEHIPPINGRATE MODEL ABCWDHWDWDHVW IDTHEPTHEIGHTIDTHEPTHIDTHEPTHEIGHTOLUMEEIGHT Note: UTILITY INFORMATION MISCELLANEOUS GAS: - - ELECTRIC: - - OPTIONS AND ACCESSORIES Energy Sta INTENDED FOR COMMERCIAL USE ONLY. NOT FOR HOUSEHOLD USE. 1100 Old Honeycutt Road, Fuquay-Varina, NC 27526 (919) 762-1000 www.southbendnc.com Wall Mounted Sorting Shelves Item # Qty Model # Project SOLID MODEL #LengthWidthHeightWeight ` PB-SRW-2121"18"16"5 PB-SRW-4242"18"16"10 PB-SRW-6663"18"16"25 L TUBULAR 22" MODEL #LengthWidthHeightWeight BHS1822-TS22"18"11"20 BHS1842-TS42"18"11"23 ROLLED FRONT EDGE BHS1863-TS62"18"11"25 13 3/4" 3 3/4" 5/16 X 1 TUBE FOR A DRAIN FEATURES: Solid sorting wall shelff CONSTRUCTION: 11 1/4" TIG -Welded with exposed surfaces blended to match 11 1/4" L18 3/8" MATERIAL: FEATURES: Brackets are 18 guage type 300 series stainless steel Shelf is 18 gauge type 300 series stainless steelDual purpose open design, Wall mounted sorting shelf CONSTRUCTION: Unit is shipped with assembly hardware, No Welding MATERIAL: Brackets are 16 guage type 300 series stainless steel Tubing is 1-5/8" dia. Type 300 stainless steel John Boos & Co 3601 S. Banker Street - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 Email: sales@johnboos.com - Web-site: www. johnboos.com John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice July 2013 "Clean Dish Tables" Pro-Bowl Straight Dish Tables w/ Stainless Steel Base & Bracing 16 ga. 300 S/S welded Bowl STANDARD: 16 ga. 304 S/S sides and Splash 10" Back Splash 16 GAUGE TOP w/ BRACING Qty JDTC-20-48L JDTC-20-26 JDTC-20-36 JDTC-20-48 FEATURES: JDTC-20-60 * Standard 16 Gauge JDTC-20-72 Type 300 stainless steel with # 4 polish, satin finis h JDTC-20-96 10" High Boxed Backsplash * Full length , with 2" return to wall at 45 degree and 3/4" turned down rear lip Must specify * All outside corners of assembly are Bullnosed to Left or Right provide safe,clean and polished edge Drainboards * Standard legs 1-5/8" diameter, 16 gauge Stainless Steel * All models are approved by the National Sanitation Foundation and the U.S. Department of Agriculture. CONSTRUCTION: Top:Stainless Steel Sinks are TIG welded, Exposed welds are polished to match adjacent surface. MATERIAL:OPTIONAL CCESSORIE AS Bowls &16 gauge stainless Steel Top:Type 300 stainless steel with # 4 polish, satin finis h Qty Legs:1 5/8" Round O.D., 16 gauge stainless steel Type 300 stainless steel with # 4 polish, satin finish UNDERSHELF Bracing:1 1/4" Round O.D., 16 gauge stainless steel OVERSHELVES Type 300 stainless steel with # 4 polish, satin finis h POT RACK Gussets:Stainless Steel Feet:1" adjustable stainless steel bullet feet John Boos & Co 3601 S. Banker St. - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 R-1 Email: sales@johnboos.com - Web-site: www. johnboos.com DETAILED SPECIFICATIONS DISH MACHINE BUILT-IN SLOPE TOWARDBUILT-IN SLOPE TOWARD DISH MACHINE (1/8" PER FOOT)DISH MACHINE (1/8" PER FOOT) LL 5 7/8"5 7/8" 30 3/8"30 3/8" 20 7/8"20 7/8" STRAIGHT CLEAN LEFTSTRAIGHT CLEAN RIGHT TURN DOWNTURN DOWN ON RISERON RISER OPERATOR 6"6" 44 1/16" 44 1/16" 1-5/8 18GA S.S.1-5/8 18GA S.S. LEGSLEGS 34 1/16"34 1/16" 36 5/16"36 5/16" DECK HT.DECK HT. TOP OFADJ. ALUM.ADJ. ALUM.TOP OF (AT LOWEST(AT LOWEST CONNECTORCONNECTOR ROLLROLL POINT)POINT) ADJ. IN HEIGHTADJ. IN HEIGHT ADJUSTABLE S.S. BULLET FEETADJUSTABLE S.S. BULLET FEET All units ship unassembled for reduced shipping cost. Units 7 ft. and larger are furnished with four legs. All dimensions are typical. Tolerance +/- .500". STANDARD 16 GAUGE LMODELBOWL SIZEDIMENSIONSWT. 26"- JDTC-20-2626" x 30-3/8"38 JDTC-20-36-36" x 30-3/8" 36"45 JDTC-20-48-48" x 30-3/8" 48"60 60" x 30-3/8" JDTC-20-60- 60"70 72" x 30-3/8" JDTC-20-72- 72" 85 JDTC-20-96-96" x 30-3/8" 96"110 John Boos & Co 3601 S. Banker St - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 Email: sales@johnboos.com - Web-site: www.johnboos.com June 2013 John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice R-2 "DT3B" Clean Dishtable / Pot Sinks Three Compartment Sinks w/ Stainless Steel Base & Bracing 16 ga. 300 S/S welded Bowls STANDARD: 16 ga. 300 S/S sides and Splash 10" Back Splash STANDARD Qty 16 Gauge DT3B18244-2D24R DT3B18244-2D24L DT3B18244-2D24R DT3B244-2D24L FEATURES: DT3B244-2D24R * Standard 16 Gauge Type 300 stainless steel with # 4 polish, satin finish * 14" Deep Bowls * All Corners, both vertical and horizontal, coved at 3/4" radius * Bottoms of bowls formed for drainage to 3-1/2" diameter Bowl Sizes: die stamped opening 18" X 24" 10" High Boxed Backsplash * Full length , with 2" return to 24" X 24" wall at 45 degree and 1" turned down rear lip * 1-1/8" Faucet Holes in Backsplash * All outside corners of assembly are Bullnosed to provide safe,clean and polished edge * Standard stainless steel legs 1-5/8" diameter * Legs located directly under sink bowls, providing increased stability and maximum weight support Includes: *(3) Rack Slides w/ Storage Bracket CONSTRUCTION: Top:Stainless Steel Sinks are TIG welded, Exposed welds are polished to match adjacent surface. OPTIONAL Bases:Stainless Steel Bases are MIG welded CCESSORIE AS Qty MATERIAL: FAUCETS Bowls &16 gauge stainless Steel ADD-A-FAUCETS Top:Type 300 stainless steel with # 4 polish, satin finish PRE-RINSE UNITS Legs:1 5/8" Round O.D., stainless steel LEVEL WASTE Bracing:1 1/4" Round O.D., stainless steel OVERSHELVES Gussets:Stainless Steel POT RACK Feet:1" adjustable stainless steel bullet feet John Boos & Co 3601 S. Banker Street - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 P-49 Email: sales@johnboos.com - Web-site: www. johnboos.com DETAILED SPECIFICATIONS BOWLSFGH 18 X 2429-1/2"24"14-15/16" 24 X 2429-1/224"14-15/16" L 30" STANDARD 16 GAUGE MODELBOWL SIZEDIMENSIONSDBWT. DT3B18244-2D24L18"24"30"103.5"24"420 DT3B18244-2D24R18"24"30"103.5"24" 420 DT3B244-2D24L24"24"30"121.5"24"550 DT3B244-2D24R24"24"30"121.524" 550 A 16-1/4" B 14" C 10" D 43" All dimensions are typical. Tolerance +/- .500". All units ship unassembled for reduced shipping cost. John Boos & Co 3601 S. Banker Str - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 Email: sales@johnboos.com - Web-site: www.johnboos.com July 2013 John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice P-50 Item No. SpeciÐer IdentiÐcation No. Ingredient Bins Model No. Slant Top Quantity Models IBS20 - 21 gallon (81 L) IBS27 - 27 gallon (102 L) IBS37 - 37 gallon (140 L) Features & BeneÐts ¥ Stores and transports a wide variety of dry ingredients such as Ñour, sugar, rice or grains. Perfect for restaurants, food manufacturers or commissaries. IBS20 ¥ Available in 21, 27, and 37 gallon (81, 102, 140 L) capacity to meet standard industry requirements for storage and transportation of bulk foods. ¥ One-piece, seamless single-wall polyethylene bin construction is extremely durable. Won't rust or corrode. Liquids and dry foods will not stick or seep between seams. ¥ FDA accepted material. Meets all food contact requirements and eliminates need for liners. ¥ Smooth interior and exterior are easy to clean. ¥ Injection molded Camwearpolycarbonate lids are ¨ transparent, break resistant and offer quick and easy identiÐcation of contents. Slide-back feature means easy access. ¥ Special design of lid allows for easy drainage and quick IBS27 drying while completely protecting contents. Spilled Ñuids drain off back lid. ¥ Slant Top models include an S-Hook on the front of the bin for conveniently hanging ingredient scoops. ¥ Working height permits storage under standard work tables. ¥ Heavy-duty 3" (7,6 cm) casters, 2 front swivel, 2 Ðxed. ¥ No assembly required. ¥ Available in White (148) only with Clear (135) cover. IBS37 Scoops not included. Approvals ¨ © 2004 Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, California 92647-2056-U.S.A. (714) 848 1555(800) 854 7631 (800) 833 3003 TelephoneToll FreeCustomer Service Hot Line LIT FCST-0904 Item No. Ingredient Bins SpeciÐer IdentiÐcation No. Slant Top Models IBS20 - 21 gallon (81 L) Model No. IBS27 - 27 gallon (102 L) IBS37 - 37 gallon (140 L) Quantity IBS20 1 29/" 1 21/" 1 21 29/" 16/" 2 2 2 (75 cm) (55 cm) (75 cm) (42 cm) 28" 28" 23" (71 cm) (71 cm) 23" (58 cm) (58 cm) IBS37 IBS27 SpeciÐcations Dimension Tolerance: +/- /" (0,64 cm) 1 4 VolumeLoadExterior DimensionsCase lbs./cube CodeDescriptionCapacityCapacityW x D x HKg/m 3 Slant Top Ingredient Bin IBS2021 gal. Slant Top Ingredient Bin2.87 Cubic feet170 lbs.140 lbs.13" x 29 1/" x 28"28 (6.57) 2 (81 L)(0,081) Cubic meters(77 kg.)(63 kg.)(33 x 75 x 71 cm)13 (0,19) IBS2727 gal. Slant Top Ingredient Bin3.98 Cubic feet226 lbs.150 lbs.16 1/" x 29 1/" x 28"24 (7.75) 22 (102 L)(0,113) Cubic meters(103 kg.)(68 kg.)(42 x 75 x 71 cm)11 (0,22) IBS3737 gal. Slant Top Ingredient Bin5.55 Cubic feet314 lbs.225 lbs.21 1/" x 29 1/" x 28"28 (10.10) 22 (140 L)(0,157) Cubic meters(142 kg.)(102 kg.)(55 x 75 x 71 cm)13 (0,29) Architect Specs The Ingredient Bins shall be Cambro Model..., manufactured by Cambro Mfg. Co.,It shall have four each 3Æ (7,6 cm) casters with 1/Æ (3,2 cm) wide tread, 2 front swivel and 1 4 Huntington Beach, CA 92648 U.S.A. Each unit shall be one piece, seamless, single-wall2 Ðxed. It shall have an injection molded, transparent, slide-back polycarbonate lid. It molded construction made of FDA Approved white polyethylene. Unit capacity shallshall not exceed 29Æ (73,6 cm) in height so that it can store under standard work tables. It range from 21 - 37 gallons (81 - 140 L) and/or 2.87 - 5.55 cu. ft. (0,081 - 0,157 cubic meters).shall be available in white only with a clear cover. Approvals ¨ © 2004 Cambro Manufacturing Company 5801 Skylab Road, Huntington Beach, California 92647-2056-U.S.A. (714) 848 1555(800) 854 7631 (800) 833 3003 TelephoneToll FreeCustomer Service Hot Line Printed in USA "E1S8-1DB" "E" Series Sinks One Compartment Sinks w/ 1 Drainboard w/ Galvanized Legs 18 ga. 300 S/S welded Bowls STANDARD: 18 ga. 300 S/S sides and Splash 10" Back Splash 12" DEEP Qty 18 Gauge E1S8-1620-12L18 E1S8-1620-12R18 E1S8-18-12L18 FEATURES: E1S8-18-12R18 * Standard 18 Gauge Type 300 stainless steel with # 4 polish, satin finishBowl Sizes: * 12" & 14" Deep Bowls 16" X 20" * All Corners, both vertical and horizontal, coved at 3/4" radius 18" X 18" * Bottoms of bowls formed for drainage to 3-1/2" diameter die stamped opening 10" High Boxed Backsplash * Full length , with 2" return to 14" DEEP wall at 45 degree and 1" tile edg e 18 GaugeQty * 1" Faucet Holes in Backsplash E1S8-1824-14L24 * All outside corners of assembly are Bullnosed to E1S8-1824-14R24 provide safe,clean and polished edge E1S8-24-14L24 * Standard galvanizes legs 1-5/8" diamete r E1S8-24-14R24 * Legs located directly under sink bowls, providing increased stability and maximum weight supportBowl Sizes: 18" X 24" 24" X 24" CONSTRUCTION: Top:Stainless Steel Sinks are TIG welded, Exposed welds are polished to match adjacent surface. Bases:Galvanized Base MATERIAL: Bowls &18 gauge stainless Steel Top:Type 300 stainless steel with # 4 polish, satin finish Legs:1 5/8" Round O.D., galvanzied steel Gussets:Galvanized Feet:1" adjustable plastic bullet feet John Boos & Co 3601 S. Banker Street - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 NN-3 Email: sales@johnboos.com - Web-site: www. johnboos.com DETAILED SPECIFICATIONS BOWLSFGH 16 X 2025-1/2"20"12-15/16" 18 X 1823-1/2"18"11-15/16" 18 X 2429-1/2"24"14-15/16" 24 X 2429-1/2"24"14-15/16" STANDARD 12" DEEP A 14-1/4" BMODELBOWL SIZEDIMENSIONSDBWT. 12" C 10"E1S8-1620-12L1816 X 20 X 1236-1/2" X 25-1/2"18"96 D 43-3/4"E1S8-1620-12R1816 X 20 X 1236-1/2" X 25-1/2"18"96 E1S8-18-12L1818 X 18 X 1238-1/2" X 23-1/2"18"96 E1S8-18-12R1818 X 18 X 1238-1/2" X 23-1/2"18"96 ASTANDARD 14" DEEP 16-1/4" BMODELBOWL SIZEDIMENSIONSDBWT. 14" C 10"E1S8-1824-14L2418 X 24 X 1444-1/2" X 29-1/2"24"119 D 43-3/4"E1S8-1824-14R2418 X 24 X 1444-1/2" X 29-1/2"24"119 E1S8-24-14L2424 X 24 X 1450-1/2" X 29-1/2"24"148 E1S8-24-14R2424 X 24 X 1450-1/2" X 29-1/2"24"148 All dimensions are typical. Tolerance +/- .500". All units ship unassembled for reduced shipping cost. John Boos & Co 3601 S. Banker Str - Effingham, IL 62401 Phone: 217-347-7701 - Fax: 217-347-7705 Email: sales@johnboos.com - Web-site: www.johnboos.com July 2013 John Boos is constantly engaged in a program of improving products and therefore reserves the right to change specification without prior notice NN-4 Model No. T&S BRASS AND BRONZE WORKS, INC. B-2414-CR-SC 2 Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 29690 Item No. REG. #A2601 ISO #9001 Simi Valley, CA: 800-423-0150www.tsbrass.com Travelers Rest, SC: 800-476-4103 Fax: 864-834-3518 This Space for Architect/Engineer Approval Job Name __________________________Date_________ Model Specified_____________________ Quantity______ Customer/Wholesaler______________________________ Contractor_______________________________________ Architect/Engineer_________________________________ Cerama Cartridges060X w/ Check Valves,Swing Nozzle w/ Lever Handles w/ B-PT Stream Color Coded IndexesRegulator Outlet 8" \[203mm\] 6 1/8" Mounting \[156mm\] Surface 3 3/8" \[86mm\] 1/2" NPT 2" 8" 2 3/8" Female \[51mm\] \[203mm\] \[60mm\] Inlets Flange Adjustable from 7 3/4" to 8 1/4" C/C \[197mm to 210mm\] DrawnCheckedApproved Product Specifications: DMHJHB KJG 8" c/c Wall Mount Mixing Faucet w/ Cerama Cartridges w/ Check Valves, 8" Swing Nozzle, B-PT Stream Regulator Outlet & 1/2" NPT Date: Scale: Female Inlets 1:4 10/08/10 2 Sheet:1 of Model No. T&S BRASS AND BRONZE WORKS, INC. B-2414-CR-SC 2 Saddleback Cove / P.O. Box 1088 Travelers Rest, SC 29690 Item No. REG. #A2601 ISO #9001 Travelers Rest, SC: 800-476-4103Simi Valley, CA: 800-423-0150Fax: 864-834-3518www.tsbrass.com ITEM SALES NO.DESCRIPTION NO. Cerama Cartridge, RTC w/ Check 1012394-25 Valve 2001661-45Red Index-HW 3B-PTStream Regulator Outlet 4001048-45Nozzle Tip Washer 5060X8" Swing Nozzle Assembly 6009538-45Swivel Washer 7001074-45O-Ring 8011429-45Swivel Sleeves (2) 5 9000922-45Lever Handle Screw 10001660-45Blue Index-CW 46 11001638-45Lever Handle Cerama Cartridge, LTC w/ Check 12012395-25 3 Valve 7 13001019-45Coupling Nut Washer 2 1400AAFlange Assembly 8 9 1 10 11 12 14 13 Approved Product Specifications: Drawn Checked DMH JHB 8" c/c Wall Mount Mixing Faucet w/ Cerama Cartridges w/ Check KJG Valves, 8" Swing Nozzle, B-PT Stream Regulator Outlet & 1/2" NPT Scale: Date: Female Inlets NTS 10/08/10 2 Sheet:2 of Project :_______________________________________ Location :_____________________________________ Item #Quantity :___________________:_____________ Model # :______________________________________ REACH-IN: AN23BT IRR- MODEL: Bottom Mounted Reach-in Freezers General Strengths Sanitation. The interior cabinet is built with rounded corners (extensive radius for easy cleaning). Quick ability to take off shelves and slides for interior cleaning. Each cabinet has a drain at the bottom of the unit. When cleaning the unit make sure the drain hose is routed to a floor drain. Doors. Self-closing door system with permanent pressure. Stay open feature included when door remains open after 95 degrees. All doors include triple chamber door gaskets, easy to remove and snap in. Field reversible door. Control systems. Higher precision in managing temperature settings. Greater ability to adjust of temperature ranges as per the end users requirement. 100% Tested. All condenser units are tested 100%, in helium chambers to refrigerant leak detections. Certified. INTERTEK Audited and Certified by for compliance with UL 471 and NSF 7. AENOR audited and certified by internationally recognized firm. ISO 9001:2008 (Quality); ISO 14001:2004 (Environmental); OSHAS 18001:2007 (Prevention and Worker Safety) Lighting. LED lighting in the canopy and cabinet sides reduces the energy consumption by 80% and 90% compared to a traditional bulb. Provides a much better light quality. Dimensions Crated Ref. Temp. Cond. Case Capacity N— N— (inches)Weight (mm) MODEL Ref. Weight Range Unit. Amps (Cu. Ft.) Doors Shelves (Lbs.) H (Lbs.) (—F) H.P. 115 V. (L) (gr.)(—C) W D (Kg.) 27 31-3/8 83-3/8 1.05 0 ˜F 23 353 1 3 R404A 5/8 14.1 IRR-AN23BT 687 8002087475-18 ˜C652160 ETL LISTED TO UL471 STANDARD AND SANITATION CLASSIFIED TO NSF7  WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE Infrico USA Corp.www.infrico.us APPROVALS: AVAILABLE AT: 7042 N.W. 46th Street service@infrico.com Miami, FL 33166 sales@infrico.com ___________ ______________ 1.305.777.9599 Office 1.305.777.9598 Fax Follow us: Project :_______________________________________ Location :_____________________________________ Item #Quantity :___________________:_____________ Model # :______________________________________ REACH-IN: AN23BT IRR- MODEL: Bottom Mounted Reach-in Freezers STANDARD FEATURES Shelving Exterior (3) Three plastic coated wire shelves per door with AISI 430 Stainless Steel. stainless steel tray slides included, Interior Dimensions WxD: 20-7/8€x25-5/8€ (530x650 mm), AISI 430 Stainless Steel. Tray slides are compatible with 18€x26€ (457x660 mm) Sealed interior floors and rounded cabinet and 12€x20€ sheet pans. (305x660 mm) corners, Refrigeration LED lighting, Digital temperature controller with automatic defrost Internal drain plug for easy cleaning. system, Doors Expansion valve and hot gas defrost system for low Polyurethane insulated door, temp units, Self closing door with stay open feature, Stainless steel evaporative pan, Stainless Steel heavy-duty hinges, Evaporator coil coated with anti-corrosion material Triple chamber snap in door gaskets for easy 100% Polyester, removal and cleaning, Forced air refrigeration system, Heated door frames to avoid accumulation of ice. Refrigeration capacity: 1849 Btu/h(-22˜F) / 542 W (-30˜C). Field reversible door, Electrical Door lock, Cord and NEMA 5-20P plug. Full-height door opening: 23€x53€ (584x1346 mm). Electrical connection is 115V / 1ph / 60 Hz. Insulation CFC-Free polyurethane insulation, entire cabinet ETL Listed to UL471 Standard and Sanitation structure is foamed-in place using a high density classified to NSF7. polyurethane insulation, Low GWP & Zero ODP effect. PLAN VIEW Casters 4€ diameter casters, RIGHT VIEW ELEVATIONPLAN VIEW Locks provided on front set. OPTIONAL FEATURES Stainless Steel wire shelf, Additional slide kits, Set of 6 legs, height adjustable from 5€ to 8€. Electrical connection is 230V / 1ph / 50 Hz (plug type varies). ETL LISTED TO UL471 STANDARD AND SANITATION CLASSIFIED TO NSF7  WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE Infrico USA Corp.www.infrico.us APPROVALS: AVAILABLE AT: 7042 N.W. 46th Street service@infrico.com Miami, FL 33166 sales@infrico.com ___________ ______________ 1.305.777.9599 Office 1.305.777.9598 Fax Follow us: Project :_______________________________________ Location :_____________________________________ Item #Quantity :___________________:_____________ Model # :______________________________________ REACH-IN: AN49 IRR- MODEL: Bottom Mounted Reach-in Refrigerators General Strengths Sanitation. The interior cabinet is built with rounded corners (extensive radius for easy cleaning). Quick ability to take off shelves and slides for interior cleaning. Each cabinet has a drain at the bottom of the unit. When cleaning the unit make sure the drain hose is routed to a floor drain. Doors. Self-closing door system with permanent pressure. Stay open feature included when door remains open after 95 degrees. All doors include triple chamber door gaskets, easy to remove and snap in. Doors are field reversible. Control systems. Higher precision in managing temperature settings. Greater ability to adjust of temperature ranges as per the end users requirement. 100% Tested. All condenser units are tested 100%, in helium chambers to refrigerant leak detections. Certified. INTERTEK Audited and Certified by for compliance with UL 471 and NSF 7. AENOR audited and certified by internationally recognized firm. ISO 9001:2008 (Quality); ISO 14001:2004 (Environmental); OSHAS 18001:2007 (Prevention and Worker Safety) Lighting. LED lighting in the canopy and cabinet sides reduces the energy consumption by 80% and 90% compared to a traditional bulb. Provides a much better light quality. Dimensions Crated Ref. Temp. Cond. Case Capacity N— N— (inches)Weight (mm) MODEL Ref. Weight Range Unit. Amps (Cu. Ft.) Doors Shelves (Lbs.) H (Lbs.) (—F) H.P. 115 V. (L) (gr.)(—C) W D (Kg.) 54-1/231-3/8 83-3/8 0.73 33˜F/38˜F 49 432 2 6 R134a 1/2 8.7 IRR-AN49 1385 80020873300˜C/4˜C1388196 ETL LISTED TO UL471 STANDARD AND SANITATION CLASSIFIED TO NSF7  WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE Infrico USA Corp.www.infrico.us APPROVALS: AVAILABLE AT: 7042 N.W. 46th Street service@infrico.com Miami, FL 33166 sales@infrico.com ___________ ______________ 1.305.777.9599 Office 1.305.777.9598 Fax Follow us: Project :_______________________________________ Location :_____________________________________ Item #Quantity :___________________:_____________ Model # :______________________________________ REACH-IN: AN49 IRR- MODEL: Bottom Mounted Reach-in Refrigerators STANDARD FEATURES Shelving Exterior (3) Three plastic coated wire shelves per door with AISI 430 Stainless Steel. stainless steel tray slides included, Interior Dimensions WxD: 20-7/8€x25-5/8€ (530x650 mm). AISI 430 Stainless Steel. Tray slides are compatible with 18€x26€ (457x660 mm) Sealed interior floors and rounded cabinet and 12€x20€ sheet pans, (305x660 mm) corners, (3) Three plastic coated tray divider. LED lighting, Refrigeration Internal drain plug for easy cleaning. Digital temperature controller with automatic defrost Insulation system, CFC-Free polyurethane insulation, entire cabinet Stainless steel evaporative pan, structure is foamed-in place using a high density Evaporator coil coated with anti-corrosion material polyurethane insulation, 100% Polyester, Low GWP & Zero ODP effect. Forced air refrigeration system, Doors Refrigeration capacity: 1983 Btu/h (14˜F) / 568 W (-10˜C). Polyurethane insulated door, Electrical Self closing door with stay open feature, Cord and NEMA 5-15P plug. Stainless Steel heavy-duty hinges, Electrical connection is 115V / 1ph / 60 Hz. Triple chamber snap in door gaskets for easy removal and cleaning, ETL Listed to UL471 Standard and Sanitation Field reversible door, classified to NSF7. Door locks, Full-height door opening: 23€x53€ (584x1346 mm). Casters PLAN VIEW 4€ diameter casters. ELEVATIONRIGHT VIEWPLAN VIEW Locks provided on front set. OPTIONAL FEATURES Stainless Steel wire shelf, Additional slide kits, Set of 6 legs, height adjustable from 5€ to 8€. Electrical connection is: 230V / 1ph / 50 Hz (plug type varies). ETL LISTED TO UL471 STANDARD AND SANITATION CLASSIFIED TO NSF7  WE RESERVE THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT PRIOR NOTICE Infrico USA Corp.www.infrico.us APPROVALS: AVAILABLE AT: 7042 N.W. 46th Street service@infrico.com Miami, FL 33166 sales@infrico.com ___________ ______________ 1.305.777.9599 Office 1.305.777.9598 Fax Follow us: